-
Plug-in night lamp. twilight sensor - automatic lighting in the dark power supply AC 220-240V, 50Hz color: white Suitable for lighting stairs, corridors, bedrooms, etc. -
58 different melodies on the wireless doorbell Volume adjustment - 5 levels (25-85dB) 4 modes - ringing, flashing light, ringing + flashing light, ringing + steadily lit light. LED indicator on both the clock and the clock button Place of the covered name tag on the clock button Protection class IP55 for the clock button, IP20 for the clock. Fixing the bell button and doorbell with self-adhesive tape or with mounting holes Color - white Signal range in open space: 250 m Transmission frequency: 433 MHz Power supply: bell button: 1x 3V (CR2032) battery (included in the set) doorbell: 230V Operating temperature: -10 ° C to + 40 ° C It is possible to pair 6 bell buttons with one door bell and vice versa. Open the battery compartment cover of the new transmitter and remove the insulating tape from the 3V CR2032 batteries. Observe the polarity of the batteries! Choose the location of the clock button so that the working area is free of obstacles in relation to the receiver, otherwise the working area of the equipment will be reduced. The clock face is weatherproof, but still choose an area protected from precipitation and direct sunlight. Use the melody button to select and change the melody. The melody selection is saved automatically when the melody ends. Adjust the volume from the volume button. Press the multifunction button to select the ringtone mode. The learning function allows you to pair door bells and buttons with one set. In this way, several bell buttons can be used to operate one door bell or vice versa. Press the multifunction button on the doorbell to set new transmitters. Then press the bell button 30 times within 2 seconds until the buzzer starts. To delete the transmitter from the doorbell memory, hold down the multifunction button for 10 seconds. -
1 receiver + 3 bell buttons. 36 different ringtones, working radius up to 50 meters.
Clock button battery 3x CR2032 3V (included). Receiver 230V, 16A, 50Hz.
NB! The receiver is only intended for indoor use, the moisture class of the clock button is IP44. -
Magnetic clip for easy attachment to metal surfaces Power supply: 3x AAA LR03 batteries Light sources: COB LED LED lifetime: 100 hours Material: ABS -
A multi-functional work lamp with extremely strong light intensity that will not leave you in trouble in any situation. Take it with you on a hike, fishing trip or light up an entire object with it. The work lamp has a hanging loop, a strong magnet and a bottle opener. Extremely small dimensions, can even be used as a key holder. Rechargeable LED work light with USB connector Light intensity: 600lm 3 light modes: 100%, 50%, 30%, flashing Working time max 3h Charging time: 2 hours Built-in battery Dimensions: 63 x 46mm Color: black -
Technical data: Max voltage between contacts and ground is CAT III, 600V. Fuse: 200mA, 250 V 2 pcs. Max numerical reading: 1999, 3½. Polarity indication "-"; negative polarity. When the limit value of the measuring range is exceeded: "1" is shown on the display. Polarity: Only ``-'' on the display. Low battery indication: the battery symbol flashes. Battery: 9 V. Operating temperature: 0...+40 °C. Storage temperature: -10...+50 °C. Dimensions: 138x69x31 mm. Weight: about 170g.
The accuracy of the meter is calibrated for approximately one year of use at a temperature of 16-28 °C and a relative humidity of 80%. -
Technical data: Max voltage between contacts and ground is CAT III, 600V. Fuse: 200mA, 250 V 2 pcs. Max numerical reading: 1999, 3½. Polarity indication "-"; negative polarity. When the limit value of the measuring range is exceeded: "1" is shown on the display. Polarity: Only ``-'' on the display. Low battery indication: the battery symbol flashes. Battery: 9 V. Operating temperature: 0...+40 °C. Storage temperature: -10...+50 °C. Dimensions: 138x69x31 mm. Weight: about 170g.
The accuracy of the meter is calibrated for approximately one year of use at a temperature of 16-28 °C and a relative humidity of 80% -
With the detector, it is possible to identify wooden frames, metal and live cables inside the wall or floor. It is intended for use in construction, mounting furniture to the wall, etc. -
Electric moisture meter e. hygrometer. Two sharp-tipped metal sensors are pressed against the material, the device's LCD screen displays the wood moisture indicator in percent. Measuring range 5...42% (+/-1%). Operating temperature 0...+40C. Battery 1x9V is included. NB! Surface treatment of wood is not recommended if the humidity is higher than 18%. -
Technical specifications: Max voltage between contacts and ground is CAT III, 250V. Max numerical reading: 1999, 3½. Polarity indication "-"; negative polarity. When the limit value of the measuring range is exceeded: "1" is shown on the display. Polarity: Only ``-'' on the display. Low battery indication: the battery symbol flashes. Test battery: 9 V included. Operating temperature: 0...+40C. Storage temperature: -10...+50C. Dimensions: 115x65x31 mm. Weight: about 170g. Voltage AC V: 200mV - 250V Voltage DC V: 200V - 250V DC current: 200mA - 10A Resistance: 200 - 2M ohms -
DC and AC current clamps Intensity AC (2A / 20A / 200A / 400A) Voltage AC/DC (200mV / 2V / 20V / 200V / 600V) resistance (200? / 2k? / 20k? / 200k? / 2M? / 20M?) diode test continuity test Operating conditions: 0...+40C, storage conditions -10...+50C. The backlight of the LCD screen allows you to read the information on the screen even in poor light. The set includes batteries 2xAAA, measuring cables, cloth case. -
In the set: ø 4.8x300 3 pcs ø 6.4x300 3 pcs ø 7.9x300 3 pcs ø 12.7x300 3 pcs With glue. -
Set ø 6.4x300 2 pcs ø 9.5x300 2 pcs ø15.0x300 2 pcs ø19,0x300 2 pcs With glue. -
Quick and moisture-proof soldering of two cables. Heat the cable connection with a hair dryer to the desired temperature, when the tin melts and the shrink wrap creates a moisture-proof connection over the solder. In the set: 25x white 26mm 0.25 - 0.34 mm² 35x red 40mm 0.50 - 1.00 mm² 30x blue 40mm 1.50 - 2.50 mm² 5x yellow 40mm 4.00 - 6.00 mm² -
Quick and moisture-proof soldering of two cables. Heat the cable connection with a hair dryer to the desired temperature, when the tin melts and the shrink wrap creates a moisture-proof connection over the solder. 10x white 26mm 0.25 - 0.34 mm² 23x red 40mm 0.50 - 1.00 mm² 12x blue 40mm 1.50 - 2.50 mm² 5x yellow 40mm 4.00 - 6.00 mm² -
Heat shrink tubing shrinks from 2mm to 0,7mm. Reduction ratio: 2:1. Operating temperature: -55...125°. Shrinkage temperature: 70...110C°.
