- Cleaner combustion: Reduces engine wear and ensures a longer service life.
- Environmental friendly: The composition of the product reduces the amount of harmful exhaust gases, which contributes to a cleaner environment.
- Ready to use: It does not need to be mixed with oil beforehand, which makes using the product convenient and quick.
- Universal fit: An ideal choice for a variety of four-stroke engines, offering a wide range of applications.
-
4T Alkyl gasoline 5L is a high-quality fuel specially developed for four-stroke engines. This ensures cleaner combustion for the engine, reduces the generation of harmful exhaust gases and extends the life of the engine. Produced using innovative technology, this fuel is ideal for garden and forestry machinery, including lawnmowers, trimmers and chainsaws. -
Alkyl Gasoline 2T is specially developed for two-stroke engines to provide the best protection and performance. This 5 liter pack is the perfect solution for both professionals and hobbyists looking for reliable fuel for their equipment.- Extremely clean combustion: Significantly reduces engine contamination and prevents the formation of harmful deposits, thereby extending the life of the engine.
- Instant launch: Thanks to its high-quality composition, this gasoline ensures a smooth and quick start even at low temperatures, enabling efficient work in all conditions.
- Protection against wear: Specially formulated additives protect the engine from wear, ensuring a longer and trouble-free service life.
- Reduced emissions: Alkyl gasoline 2T is designed with environmental friendliness in mind, significantly reducing the amount of exhaust gases compared to conventional fuels.
-
Neutralizes hydrofluoric acids and nitric acids. Can be removed with water. The reaction ends when there are no more pimples. -
Pickling gel for all types of stainless steel and nickel alloys. Removes color changes caused by heat caused by welding. With high pickling efficiency and speed. Does not contain hydrochloric acid or chlorides. Special red color -
For cleaning and maintenance of stainless steel surfaces. Cleans and shines the surface, leaving an invisible layer that protects against fingerprints and smudges. -
For cleaning and maintenance of stainless steel surfaces. Cleans and shines the surface, leaving an invisible layer that protects against fingerprints and smudges. -
Quick-drying dielectric precision cleaner for electronic control boards, microcircuits, motherboards, etc. for cleaning. -
500 ml
Ceramic protection helps to keep away welding spatter and protects consumable parts of the welding torch up to 1500 degrees.
Reduces friction and is long-lasting. Dries quickly.
Ideal for protecting wear parts of robot welding torches. -
Safe and environmentally friendly aerosol
• 100% ceramic, oil-free composition, protects the surfaces to be welded, consumable parts of the welding torch and nozzles from welding spatter sticking.
• Chemical composition specially developed with cosmetic solutions, which is
non-carcinogenic and silicone-free. Leaves a thinner and more uniform protective layer by forming a ceramic powder.
• Dries quickly
Saves time and money
Increased welding performance up to 11% - reduces the need to clean wear parts
Provides 70% financial savings from the reduced need to replace consumable parts of the welding torch
A single application with an aerosol provides 8-hour protection
• Reduces temperature dispersion, prevents overheating of the torch and eliminates the risk of deformation of the material to be welded.
• Increases the gliding of the wire in the larynx.
• Withstands high temperatures (up to 1,400°C)
Validity 5 years from production
Bottle 400 ml
12 pcs in a box -
Water-based anti-welding spatter aerosol.
Prevents spatter from sticking to welded materials, so the workpiece does not need to be cleaned.
Safe and environmentally friendly, non-flammable and biodegradable, does not contain silicone.
Tested and approved suitability for pre-painting and electroplating.
Antioxidant Protection: Contains corrosion inhibitors to protect treated surfaces
• Increases arch stability
• Splashes can be easily removed with a cloth
• Pore-free welds
SAVES TIME AND MONEY
• Direct and targeted spraying
• Thin protective layer
• Long-lasting splash protection
360 degree application - can be sprayed from any position
Validity 3 years from production
Bottle 400 ml
12 pcs in a box -
Aluminum container, chemical resistant
Adjustable nozzle (from straight stream to mist)
The wide neck allows for easy filling
Volume 500 ml
Also suitable for spraying disinfectant liquids. -
1. Clean the weld with a wire brush, then clean the surface with the cleaning aerosol Infinity Cleaner.
Spray the cleaner on the weld, wait approx. 30 seconds and wipe the surface dry with a cloth or paper towel.
2. Spray red penetrant WS1820S CRACK1 on the surface.
Wait 3-5 minutes. If the temperature is lower than 12 degrees, the time must be longer, if higher than 45 degrees, then shorter.
Clean the surface with a penetrant cloth or paper cloth, the cloth can be gently moistened.
3. Revealed (white) WS1821S CRACK2 spray on surface. It is recommended to spray 2-3 thin layers, the surface must remain slightly moist.
If too thick a layer is applied, the penetrant can cover the developer and the cracks will not be visible. You have to wait up to 5 minutes.
Red lines indicate cracks, red dots indicate fine cracks, and dots indicate pores. -
A spray fluid with an updated formulation that contains grease-dissolving agents that may be present on metal surfaces.
Therefore, there is no need to clean the material separately before painting or galvanizing.
Contains anti-corrosion additives.
To prevent welding spatter from sticking to the material to be welded and parts of the torch.
Sprayed on the material to be welded or parts of the torch. Suitable for both robot welding and manual welding.
After use, it is possible to galvanize the surface.
Silicone-free, protects against corrosion, non-flammable, biodegradable
Does not contain organic solvents or nitrites.
Not sensitive to ambient temperature.
Suitable for processing the following materials:
- steel
- stainless steel
- steel to be galvanized -
Quickly and easily prevents welding spatter from sticking to the welding area.
Biodegradable, water based. Suitable for both welding tools and nozzles, as well as parts to be welded.
The part to be welded does not need additional cleaning before painting / galvanizing.
Welding without pores, no residue problems. Suitable for all surfaces incl. galvanized surface.
Not flammable.
Noticeably reduces the adhesion of splashes to equipment and treated surfaces and also protects against corrosion.
Spraying is possible from all positions of the can (can be rotated 360 °); spray pressure remains constant until the can is completely empty. -
Universal transparent oil for oiling sewing equipment. Suitable for use as glass knife oil. -
Special oil for oiling the saw blade and chain of chainsaws. The oil has good lubricating properties that reduce the wear of the saw chain and saw blade. -
Oil for pneumatic tools, drills and other pneumatic tools with an impact mechanism. Protects against premature wear and corrosion. Complies with ISO VG 32 standard
