- Suitability of materials: This tool is suitable for all types of material, including bricks, tin, plaster surfaces and painted wood.
- Places of use: Moss remover is effective on roofs, facades, stairs, foundations, paving slabs, tombstones, fences, sculptures, wooden fences and other surfaces. However, it is not suitable for lawns as it can damage plants.
- Why fight moss?:
- Roof moss can shorten the life of the roof.
- Moss binds water, creating a good breeding ground for different types of fungi.
- Moss can damage the roof covering and cause a leak.
- Frostbite in winter can break stone roofs.
- Only with mechanical removal, the mosses recover quickly.
- The product provides years of protection. For heavily mossy surfaces, a second treatment may be necessary. To prevent the active growth of mosses, treat the surfaces every 3-4 years.
-
Moss remover 5L Euro Clean Roof is a biological moss remover designed to remove and prevent the formation of moss, lichen, algae and mold from roofs and exterior facades. -
Würth's 1L Rust Converter is an effective and reliable solution for the restoration and protection of rust-damaged surfaces. This professional formula is designed to convert active rust into stable iron phosphate, providing long-term protection against further corrosion. Ideal for use on vehicles, machinery, tools and other metal surfaces susceptible to rusting.- Effective Rust Transformation: Converts existing rust into chemically stable iron phosphate, halting the corrosion process.
- Long Term Protection: Creates a durable layer that protects metals from further corrosion, thereby extending their life.
- Ease of Use: Easy to apply with a brush or spray, no complicated preparation or special treatment is required.
- Quick Dry: The fast-drying formula allows for quick progress on treated surfaces, reducing downtime.
- Versatile Use: Suitable for use on a variety of metal surfaces including cars, boats, garden tools and more.
- Professional Quality: A trusted and preferred choice among professionals due to its efficiency and quality.
-
- High pressure resistance
- Durable grease with good sound and vibration damping properties.
- Penetrates into narrow cracks
- Protects against corrosion
- Good adhesion
- Also stays on rotating parts.
- Good compatibility with materials
- Does not damage O- and X-rings, plastics or painted surfaces.
-
Würth Hand Wash N-Plus is a high-quality cleaning agent that has been specially developed to remove stubborn dirt such as oil, grease, tar and paint from hands, while being extremely skin-friendly. Its 4000ml packaging ensures long-term use, making it an ideal choice for both workshops and sectors with a need for more intensive hand cleaning.- Does not contain silicone oil or alkalis: Ensures safe use by protecting the skin from exposure to harmful substances.
- Cleans oil, grease, tar, paint from hands: The powerful formula ensures effective cleaning even for the heaviest industrial dirt.
- A large proportion of substances with a prophylactic effect: Helps prevent skin irritations and maintain skin health.
- Skin Friendly: The composition is enriched with skin care substances and moisturizers to support the skin's natural defenses.
- Pleasant smell: Leaves hands smelling fresh and clean.
- Does not contain soap: Gentle on the skin, thus preventing skin dryness and irritation.
- Does not clog sewers: Safe to use, does not cause problems with drainage systems.
- Dermatologically tested: Proven skin friendliness and safety.
- pH neutral: Ensures the preservation of the skin's natural balance and protects it from irritation.
-
Glues and seals wood, plastic, metals, concrete, ceramic tiles and building materials. Especially good for sealing construction joints, cracks, adhesive joints, welds, bolt and rivet joints. -
High-stability mineral engine oil for diesel engines of high-performance trucks and tractors with or without turbocharging. Made in Russia -
A pure zinc protective coating that dries quickly and has a glossy finish. With a unique and special formulation, pure zinc achieves a glossy finish. -
A cleaning agent that quickly removes oil, grease and dirt from any surface, including plastics and rubber surfaces.
Dries quickly and leaves no residue on the surface. The composition uses a combination of polar solvents.
The aerosol bottle contains 60% of the active ingredient, pressurized with CO2 - ensures a significantly longer usage time compared to other cleaning agents.
Areas of use: cleaning of chains, brake discs, cables, dies and molds. Also cleaning pneumatic tools and their parts.
Cleaning of engines and pumps. -
- Suitable for all saw brands.
- Made of high quality mineral oil.
- Contains anti-wear and anti-icing additives.
-
• Particularly good lubrication properties for all materials • Good penetration capacity • Good electrical insulating property (=14,7 kV/mm) • Temperature tolerance -40 °C ... +300 °C • Colorless when sprayed, turns white after a moment when dry • Suitable for lubricating doors, bolts, furniture hinges, sliding rails, clutches, protecting sensitive parts from moisture and corrosion -
Year-round transmission oil. For use in cylindrical, bevel and helical gears of trucks and tractors. Operating temperature -20°C to +100°C. Made in Russia -
Special oil for oiling the saw blade and chain of chainsaws. The oil has good lubricating properties that reduce the wear of the saw chain and saw blade. -
Electroplating liquid with cathodic protection for surface application by brush, roller or spray. With 1 kg of the product, it is possible to cover a surface of approx. 3,62 m² (taking into account the thickness of the dried coating layer of 60 µm). ZINGA is a one-component galvanizing system that ensures long-term cathodic protection of ferrous metals. The zinc content in the dried coating is a minimum of 96% with a zinc particle purity of 99,995% (according to ISO 3549). The product does not contain xylene, toluene, methyl ethyl ketone or methylene chloride. The dried layer is non-toxic and can be in contact with drinking water. Solids 58% by volume. The matte gray metal layer dries quickly (touch dry in 10 min at 20°C) and withstands heat up to 120°C. The protective powder layer does not crack when the metal expands and contracts and does not peel. ZINGA is easy to apply to ferrous metal, previously hot-dip galvanized and ZINGA coated surfaces. Used as an alternative to hot-dip galvanizing or metallization and to strengthen and repair previously hot-dip galvanized surfaces or as a base layer in the Duplex system (ZINGA + paint). Each applied layer of ZINGA merges with the previous one and forms a single, stronger protective layer. An excellent tool for corrosion protection of hard-to-reach or large surfaces. Store in a cool and dry place, the shelf life of the composition is unlimited. The product contains a maximum of 500g/L of volatile organic compounds (VOC) according to the permitted EU limit (cat. A/i). Due to the active composition, the unopened package has an unlimited shelf life. Preparation of the substrate: apply ZINGA to a clean, rough surface from which dirt, grease, paint, slag and salts have been removed. ZINGA needs to make direct contact with the metal for the electrochemical reaction. ZINGA products can be applied to rusted surfaces if all loose rust has been removed with a metal brush and the surface has been cleaned of rust dust and grease. For cleaning, use jet cleaning with water (140 bar, 80°C) or Zingasolv. Clean the surface to SA 2 ½ (according to ISO 8501-1) using sandblasting or blasting. ZINGA only adheres to a roughened substrate, for better adhesion the substrate must be roughened (Rz 50-70 µm – DIN4768). Such a high degree of cleanliness and roughness is not necessary when covering smaller, less specific and previously hot-dip galvanized surfaces. Make sure the substrate is dust free before coating. Application: ZINGA must be thoroughly mixed before use (it is recommended to use a mixer). ZINGA can be applied to the surface with a brush, roller or sprayer (normal or airless) by constantly mixing the product. For application, the product can be diluted with Zingasolv to achieve the required viscosity (up to 5% when applied by brush, roller or airless spray and up to 15% when sprayed with air). White spirit is not suitable for dilution, do not use White Spirit! For use as a stand-alone system, a dried protective layer of 120-180 µm thickness is applied to the surface of ZINGA in two layers. The second layer is applied to the surface 1 hour after the first one becomes dry to the touch. When used as a duplex system (ZINGA + paint), ZINGA is applied to the surface in one layer (maximum 60-80 µm thick dried protective layer). ZINGA can be covered with most fast-drying paints (oil, tar, epoxy, polyurethane, vinyl, iron oxide and other paints). It is recommended to let the substrate dry for up to 72 hours before repainting and to test the suitability of the paint on a small surface beforehand. In order to prevent the base layer from reacting during repainting, you should first apply a thin layer of paint, let it dry, and then apply a paint layer of the required thickness to the surface. It is recommended to cover the edges, bolts and welded joints separately in advance. ZINGA can be applied at temperatures from -10°C to 40°C with humidity up to 95%. More information on the technical data card. Highly flammable. May cause long-term damage to the aquatic environment. Keep out of reach of children and away from sources of ignition - no smoking. Avoid inhalation of aerosol. Use in well-ventilated rooms. Follow the instructions for use/safety requirements. Do not spray on open flame or glowing material. -
Hand wash detergent with natural perlite particles to remove moderately and heavily soiled dirt. Does not contain microplastics. -
Particularly effective soaking properties of detergent concentrate. Easily removes oils, greases, soot, brake dust, road salt, lubricants and all difficult-to-remove dirt from complex water-resistant surfaces. -
4T Alkyl gasoline 5L is a high-quality fuel specially developed for four-stroke engines. This ensures cleaner combustion for the engine, reduces the generation of harmful exhaust gases and extends the life of the engine. Produced using innovative technology, this fuel is ideal for garden and forestry machinery, including lawnmowers, trimmers and chainsaws.- Cleaner combustion: Reduces engine wear and ensures a longer service life.
- Environmental friendly: The composition of the product reduces the amount of harmful exhaust gases, which contributes to a cleaner environment.
- Ready to use: It does not need to be mixed with oil beforehand, which makes using the product convenient and quick.
- Universal fit: An ideal choice for a variety of four-stroke engines, offering a wide range of applications.
-
Alkyl Gasoline 2T is specially developed for two-stroke engines to provide the best protection and performance. This 5 liter pack is the perfect solution for both professionals and hobbyists looking for reliable fuel for their equipment.- Extremely clean combustion: Significantly reduces engine contamination and prevents the formation of harmful deposits, thereby extending the life of the engine.
- Instant launch: Thanks to its high-quality composition, this gasoline ensures a smooth and quick start even at low temperatures, enabling efficient work in all conditions.
- Protection against wear: Specially formulated additives protect the engine from wear, ensuring a longer and trouble-free service life.
- Reduced emissions: Alkyl gasoline 2T is designed with environmental friendliness in mind, significantly reducing the amount of exhaust gases compared to conventional fuels.
-
Pickling gel for all types of stainless steel and nickel alloys. Removes color changes caused by heat caused by welding. With high pickling efficiency and speed. Does not contain hydrochloric acid or chlorides. Special red color -
Neutralizes hydrofluoric acids and nitric acids. Can be removed with water. The reaction ends when there are no more pimples. -
For cleaning and maintenance of stainless steel surfaces. Cleans and shines the surface, leaving an invisible layer that protects against fingerprints and smudges. -
For cleaning and maintenance of stainless steel surfaces. Cleans and shines the surface, leaving an invisible layer that protects against fingerprints and smudges. -
Quick-drying dielectric precision cleaner for electronic control boards, microcircuits, motherboards, etc. for cleaning. -
Water-based anti-welding spatter aerosol.
Prevents spatter from sticking to welded materials, so the workpiece does not need to be cleaned.
Safe and environmentally friendly, non-flammable and biodegradable, does not contain silicone.
Tested and approved suitability for pre-painting and electroplating.
Antioxidant Protection: Contains corrosion inhibitors to protect treated surfaces
• Increases arch stability
• Splashes can be easily removed with a cloth
• Pore-free welds
SAVES TIME AND MONEY
• Direct and targeted spraying
• Thin protective layer
• Long-lasting splash protection
360 degree application - can be sprayed from any position
Validity 3 years from production
Bottle 400 ml
12 pcs in a box -
Safe and environmentally friendly aerosol
• 100% ceramic, oil-free composition, protects the surfaces to be welded, consumable parts of the welding torch and nozzles from welding spatter sticking.
• Chemical composition specially developed with cosmetic solutions, which is
non-carcinogenic and silicone-free. Leaves a thinner and more uniform protective layer by forming a ceramic powder.
• Dries quickly
Saves time and money
Increased welding performance up to 11% - reduces the need to clean wear parts
Provides 70% financial savings from the reduced need to replace consumable parts of the welding torch
A single application with an aerosol provides 8-hour protection
• Reduces temperature dispersion, prevents overheating of the torch and eliminates the risk of deformation of the material to be welded.
• Increases the gliding of the wire in the larynx.
• Withstands high temperatures (up to 1,400°C)
Validity 5 years from production
Bottle 400 ml
12 pcs in a box -
500 ml
Ceramic protection helps to keep away welding spatter and protects consumable parts of the welding torch up to 1500 degrees.
Reduces friction and is long-lasting. Dries quickly.
Ideal for protecting wear parts of robot welding torches. -
Quickly and easily prevents welding spatter from sticking to the welding area.
Biodegradable, water based. Suitable for both welding tools and nozzles, as well as parts to be welded.
The part to be welded does not need additional cleaning before painting / galvanizing.
Welding without pores, no residue problems. Suitable for all surfaces incl. galvanized surface.
Not flammable.
Noticeably reduces the adhesion of splashes to equipment and treated surfaces and also protects against corrosion.
Spraying is possible from all positions of the can (can be rotated 360 °); spray pressure remains constant until the can is completely empty. -
A spray fluid with an updated formulation that contains grease-dissolving agents that may be present on metal surfaces.
Therefore, there is no need to clean the material separately before painting or galvanizing.
Contains anti-corrosion additives.
To prevent welding spatter from sticking to the material to be welded and parts of the torch.
Sprayed on the material to be welded or parts of the torch. Suitable for both robot welding and manual welding.
After use, it is possible to galvanize the surface.
Silicone-free, protects against corrosion, non-flammable, biodegradable
Does not contain organic solvents or nitrites.
Not sensitive to ambient temperature.
Suitable for processing the following materials:
- steel
- stainless steel
- steel to be galvanized -
1. Clean the weld with a wire brush, then clean the surface with the cleaning aerosol Infinity Cleaner.
Spray the cleaner on the weld, wait approx. 30 seconds and wipe the surface dry with a cloth or paper towel.
2. Spray red penetrant WS1820S CRACK1 on the surface.
Wait 3-5 minutes. If the temperature is lower than 12 degrees, the time must be longer, if higher than 45 degrees, then shorter.
Clean the surface with a penetrant cloth or paper cloth, the cloth can be gently moistened.
3. Revealed (white) WS1821S CRACK2 spray on surface. It is recommended to spray 2-3 thin layers, the surface must remain slightly moist.
If too thick a layer is applied, the penetrant can cover the developer and the cracks will not be visible. You have to wait up to 5 minutes.
Red lines indicate cracks, red dots indicate fine cracks, and dots indicate pores. -
Aluminum container, chemical resistant
Adjustable nozzle (from straight stream to mist)
The wide neck allows for easy filling
Volume 500 ml
Also suitable for spraying disinfectant liquids. -
Does not leave an oily residue. 1. Clean the weld with a wire brush, then clean the surface with cleaning aerosol UTI000556. Spray the cleaner on the weld, wait approx. 30 seconds and wipe the surface dry with a cloth or paper towel. 2. Spray red penetrant UTI000553 on the surface. Wait 3-5 minutes. If the temperature is lower than 12 degrees, the time must be longer, if higher than 45 degrees, then shorter. Clean the surface with a penetrant cloth or paper cloth, the cloth can be gently moistened 3. Spraying revealed (white) UTI000555 on the surface. It is recommended to spray 2-3 thin layers, the surface must remain slightly moist. If too thick a layer is applied, the penetrant can cover the developer and the cracks will not be visible. You have to wait up to 5 minutes. The red lines are the reading -
1. Clean the weld with a wire brush, then clean the surface with the cleaning aerosol Infinity Cleaner.
Spray the cleaner on the weld, wait approx. 30 seconds and wipe the surface dry with a cloth or paper towel.
2. Spray red penetrant WS1820S CRACK1 on the surface.
Wait 3-5 minutes. If the temperature is lower than 12 degrees, the time must be longer, if higher than 45 degrees, then shorter.
Clean the surface with a penetrant cloth or paper cloth, the cloth can be gently moistened.
3. Revealed (white) WS1821S CRACK2 spray on surface. It is recommended to spray 2-3 thin layers, the surface must remain slightly moist.
If too thick a layer is applied, the penetrant can cover the developer and the cracks will not be visible. You have to wait up to 5 minutes.
Red lines indicate cracks, red dots indicate fine cracks, and dots indicate pores. -
Oil for pneumatic tools, drills and other pneumatic tools with an impact mechanism. Protects against premature wear and corrosion. Complies with ISO VG 32 standard -
Universal transparent oil for oiling sewing equipment. Suitable for use as glass knife oil. -
Protects ferritic materials from galvanic rusting. Suitable for ferrous alloys, pipelines, welding, marine equipment, etc. for galvanizing. Dries quickly. Creates a protective layer that can be painted over or left as a final finish. Heat tolerance up to 700 oC. 400 ml.
-
Electroplating fluid with cathodic protection in an aerosol bottle. 4% aluminum has been added to Zingaluspray, which ensures better suitability for repairing the protective layer of previously hot-dip galvanized surfaces. With 500 ML of the product, it is possible to cover an area of approx. 2,9 m² (taking into account the thickness of the dried coating layer of 60 µm). ZINGA is a one-component galvanizing system that ensures long-term cathodic protection of ferrous metals. The zinc content in the dried coating is a minimum of 96% with a zinc particle purity of 99,995% (according to ISO 3549). The product does not contain xylene, toluene, methyl ethyl ketone or methylene chloride. The dried layer is non-toxic and can be in contact with drinking water. The matte gray metal layer dries quickly (touch dry in 10 min at 20°C) and withstands heat up to 120°C. The protective powder layer does not crack when the metal expands and contracts and does not peel. ZINGA is easy to apply to ferrous metal, previously hot-dip galvanized and ZINGA coated surfaces. Used as an alternative to hot-dip galvanizing or metallization and to strengthen and repair previously hot-dip galvanized surfaces or as a base layer in the Duplex system (ZINGA + paint). An excellent tool for corrosion protection of hard-to-reach surfaces. Substrate preparation: Apply ZINGA to a clean, rough (Rz 50-70 µm – DIN4768) surface from which dirt, grease, paint, slag and salts have been removed. ZINGA needs to make direct contact with the metal for the electrochemical reaction. ZINGA products can be applied to rusted surfaces if all loose rust has been removed with a metal brush and the surface has been cleaned of rust dust and grease. For cleaning, use jet cleaning with water (140 bar, 80°C) or Zingasolv (NB do not use White Spirit!). Clean the surface to SA 2 ½ (according to ISO 8501-1) using sandblasting or blasting. Make sure the substrate is dust free before coating. Application: Mix ZINGA thoroughly before use. Shake the bottle for at least 30 seconds after the mixing balls are released in the bottle. For use as a stand-alone system, a dried protective layer of 120-180 µm thickness is applied to the surface of ZINGA in two layers. The second layer is applied to the surface 1 hour after the first one becomes dry to the touch. When used as a duplex system (ZINGA + paint), ZINGA is applied to the surface in one layer (maximum 60-80 µm thick dried protective layer). ZINGA can be covered with most fast-drying paints (oil, tar, epoxy, polyurethane, vinyl, iron oxide and other paints). It is recommended to let the substrate dry for up to 72 hours before repainting and to test the suitability of the paint on a small surface beforehand. In order to prevent the base layer from reacting during repainting, you should first apply a thin layer of paint, let it dry, and then apply a paint layer of the required thickness to the surface. ZINGA can be applied at temperatures from -10°C to 40°C with humidity up to 95%. Spray from a distance of 30 cm. More information on the technical data card. Highly flammable. May cause long-term damage to the aquatic environment. Keep out of reach of children and away from sources of ignition - no smoking. Avoid inhalation of aerosol. Use in well-ventilated rooms. Follow the instructions for use/safety requirements. Do not spray on open flame or glowing material. The bottle is under pressure. In case of ingestion, consult a doctor immediately. Protect from direct sunlight. Do not store above 50°C/ 122°F. Shake the bottle strongly before use (approx. 30 seconds after the mixing balls are released). After each use, clean the spray channel to prevent clogging. To do this, turn the bottom of the bottle upwards and hold the spray button down until the spray channel is empty of aerosol.
-
Electroplating liquid with cathodic protection for surface application by brush, roller or spray. With 1 kg of the product, it is possible to cover a surface of approx. 3,62 m² (taking into account the thickness of the dried coating layer of 60 µm). ZINGA is a one-component galvanizing system that ensures long-term cathodic protection of ferrous metals. The zinc content in the dried coating is a minimum of 96% with a zinc particle purity of 99,995% (according to ISO 3549). The product does not contain xylene, toluene, methyl ethyl ketone or methylene chloride. The dried layer is non-toxic and can be in contact with drinking water. Solids 58% by volume. The matte gray metal layer dries quickly (touch dry in 10 min at 20°C) and withstands heat up to 120°C. The protective powder layer does not crack when the metal expands and contracts and does not peel. ZINGA is easy to apply to ferrous metal, previously hot-dip galvanized and ZINGA coated surfaces. Used as an alternative to hot-dip galvanizing or metallization and to strengthen and repair previously hot-dip galvanized surfaces or as a base layer in the Duplex system (ZINGA + paint). Each applied layer of ZINGA merges with the previous one and forms a single, stronger protective layer. An excellent tool for corrosion protection of hard-to-reach or large surfaces. Store in a cool and dry place, the shelf life of the composition is unlimited. The product contains a maximum of 500g/L of volatile organic compounds (VOC) according to the permitted EU limit (cat. A/i). Due to the active composition, the unopened package has an unlimited shelf life. Preparation of the substrate: apply ZINGA to a clean, rough surface from which dirt, grease, paint, slag and salts have been removed. ZINGA needs to make direct contact with the metal for the electrochemical reaction. ZINGA products can be applied to rusted surfaces if all loose rust has been removed with a metal brush and the surface has been cleaned of rust dust and grease. For cleaning, use jet cleaning with water (140 bar, 80°C) or Zingasolv. Clean the surface to SA 2 ½ (according to ISO 8501-1) using sandblasting or blasting. ZINGA only adheres to a roughened substrate, for better adhesion the substrate must be roughened (Rz 50-70 µm – DIN4768). Such a high degree of cleanliness and roughness is not necessary when covering smaller, less specific and previously hot-dip galvanized surfaces. Make sure the substrate is dust free before coating. Application: ZINGA must be thoroughly mixed before use (it is recommended to use a mixer). ZINGA can be applied to the surface with a brush, roller or sprayer (normal or airless) by constantly mixing the product. For application, the product can be diluted with Zingasolv to achieve the required viscosity (up to 5% when applied by brush, roller or airless spray and up to 15% when sprayed with air). White spirit is not suitable for dilution, do not use White Spirit! For use as a stand-alone system, a dried protective layer of 120-180 µm thickness is applied to the surface of ZINGA in two layers. The second layer is applied to the surface 1 hour after the first one becomes dry to the touch. When used as a duplex system (ZINGA + paint), ZINGA is applied to the surface in one layer (maximum 60-80 µm thick dried protective layer). ZINGA can be covered with most fast-drying paints (oil, tar, epoxy, polyurethane, vinyl, iron oxide and other paints). It is recommended to let the substrate dry for up to 72 hours before repainting and to test the suitability of the paint on a small surface beforehand. In order to prevent the base layer from reacting during repainting, you should first apply a thin layer of paint, let it dry, and then apply a paint layer of the required thickness to the surface. It is recommended to cover the edges, bolts and welded joints separately in advance. ZINGA can be applied at temperatures from -10°C to 40°C with humidity up to 95%. More information on the technical data card. Highly flammable. May cause long-term damage to the aquatic environment. Keep out of reach of children and away from sources of ignition - no smoking. Avoid inhalation of aerosol. Use in well-ventilated rooms. Follow the instructions for use/safety requirements. Do not spray on open flame or glowing material.
-
Electroplating liquid with cathodic protection for surface application by brush, roller or spray. With 1 kg of the product, it is possible to cover a surface of approx. 3,62 m² (taking into account the thickness of the dried coating layer of 60 µm). ZINGA is a one-component galvanizing system that ensures long-term cathodic protection of ferrous metals. The zinc content in the dried coating is a minimum of 96% with a zinc particle purity of 99,995% (according to ISO 3549). The product does not contain xylene, toluene, methyl ethyl ketone or methylene chloride. The dried layer is non-toxic and can be in contact with drinking water. Solids 58% by volume. The matte gray metal layer dries quickly (touch dry in 10 min at 20°C) and withstands heat up to 120°C. The protective powder layer does not crack when the metal expands and contracts and does not peel. ZINGA is easy to apply to ferrous metal, previously hot-dip galvanized and ZINGA coated surfaces. Used as an alternative to hot-dip galvanizing or metallization and to strengthen and repair previously hot-dip galvanized surfaces or as a base layer in the Duplex system (ZINGA + paint). Each applied layer of ZINGA merges with the previous one and forms a single, stronger protective layer. An excellent tool for corrosion protection of hard-to-reach or large surfaces. Store in a cool and dry place, the shelf life of the composition is unlimited. The product contains a maximum of 500g/L of volatile organic compounds (VOC) according to the permitted EU limit (cat. A/i). Due to the active composition, the unopened package has an unlimited shelf life. Preparation of the substrate: apply ZINGA to a clean, rough surface from which dirt, grease, paint, slag and salts have been removed. ZINGA needs to make direct contact with the metal for the electrochemical reaction. ZINGA products can be applied to rusted surfaces if all loose rust has been removed with a metal brush and the surface has been cleaned of rust dust and grease. For cleaning, use jet cleaning with water (140 bar, 80°C) or Zingasolv. Clean the surface to SA 2 ½ (according to ISO 8501-1) using sandblasting or blasting. ZINGA only adheres to a roughened substrate, for better adhesion the substrate must be roughened (Rz 50-70 µm – DIN4768). Such a high degree of cleanliness and roughness is not necessary when covering smaller, less specific and previously hot-dip galvanized surfaces. Make sure the substrate is dust free before coating. Application: ZINGA must be thoroughly mixed before use (it is recommended to use a mixer). ZINGA can be applied to the surface with a brush, roller or sprayer (normal or airless) by constantly mixing the product. For application, the product can be diluted with Zingasolv to achieve the required viscosity (up to 5% when applied by brush, roller or airless spray and up to 15% when sprayed with air). White spirit is not suitable for dilution, do not use White Spirit! For use as a stand-alone system, a dried protective layer of 120-180 µm thickness is applied to the surface of ZINGA in two layers. The second layer is applied to the surface 1 hour after the first one becomes dry to the touch. When used as a duplex system (ZINGA + paint), ZINGA is applied to the surface in one layer (maximum 60-80 µm thick dried protective layer). ZINGA can be covered with most fast-drying paints (oil, tar, epoxy, polyurethane, vinyl, iron oxide and other paints). It is recommended to let the substrate dry for up to 72 hours before repainting and to test the suitability of the paint on a small surface beforehand. In order to prevent the base layer from reacting during repainting, you should first apply a thin layer of paint, let it dry, and then apply a paint layer of the required thickness to the surface. It is recommended to cover the edges, bolts and welded joints separately in advance. ZINGA can be applied at temperatures from -10°C to 40°C with humidity up to 95%. More information on the technical data card. Highly flammable. May cause long-term damage to the aquatic environment. Keep out of reach of children and away from sources of ignition - no smoking. Avoid inhalation of aerosol. Use in well-ventilated rooms. Follow the instructions for use/safety requirements. Do not spray on open flame or glowing material.
-
Electroplating fluid with cathodic protection in an aerosol bottle. With 500 ML of the product, it is possible to cover an area of approx. 2,9 m² (taking into account the thickness of the dried coating layer of 60 µm). ZINGA is a one-component galvanizing system that ensures long-term cathodic protection of ferrous metals. The zinc content in the dried coating is a minimum of 96% with a zinc particle purity of 99,995% (according to ISO 3549). The product does not contain xylene, toluene, methyl ethyl ketone or methylene chloride. The dried layer is non-toxic and can be in contact with drinking water. The matte gray metal layer dries quickly (touch dry in 10 min at 20°C) and withstands heat up to 120°C. The protective powder layer does not crack when the metal expands and contracts and does not peel. ZINGA is easy to apply to ferrous metal, previously hot-dip galvanized and ZINGA coated surfaces. Used as an alternative to hot-dip galvanizing or metallization and to strengthen and repair previously hot-dip galvanized surfaces or as a base layer in the Duplex system (ZINGA + paint). An excellent tool for corrosion protection of hard-to-reach surfaces. Substrate preparation: Apply ZINGA to a clean, rough (Rz 50-70 µm – DIN4768) surface from which dirt, grease, paint, slag and salts have been removed. ZINGA needs to make direct contact with the metal for the electrochemical reaction. ZINGA products can be applied to rusted surfaces if all loose rust has been removed with a metal brush and the surface has been cleaned of rust dust and grease. For cleaning, use jet cleaning with water (140 bar, 80°C) or Zingasolv (NB do not use White Spirit!). Clean the surface to SA 2 ½ (according to ISO 8501-1) using sandblasting or blasting. Make sure the substrate is dust free before coating. Application: Mix ZINGA thoroughly before use. Shake the bottle for at least 30 seconds after the mixing balls are released in the bottle. For use as a stand-alone system, a dried protective layer of 120-180 µm thickness is applied to the surface of ZINGA in two layers. The second layer is applied to the surface 1 hour after the first one becomes dry to the touch. When used as a duplex system (ZINGA + paint), ZINGA is applied to the surface in one layer (maximum 60-80 µm thick dried protective layer). ZINGA can be covered with most fast-drying paints (oil, tar, epoxy, polyurethane, vinyl, iron oxide and other paints). It is recommended to let the substrate dry for up to 72 hours before repainting and to test the suitability of the paint on a small surface beforehand. In order to prevent the base layer from reacting during repainting, you should first apply a thin layer of paint, let it dry, and then apply a paint layer of the required thickness to the surface. ZINGA can be applied at temperatures from -10°C to 40°C with humidity up to 95%. Spray from a distance of 30 cm. More information on the technical data card. Highly flammable. May cause long-term damage to the aquatic environment. Keep out of reach of children and away from sources of ignition - no smoking. Avoid inhalation of aerosol. Use in well-ventilated rooms. Follow the instructions for use/safety requirements. Do not spray on open flame or glowing material. The bottle is under pressure. In case of ingestion, consult a doctor immediately. Protect from direct sunlight. Do not store above 50°C/ 122°F. Shake the bottle strongly before use (approx. 30 seconds after the mixing balls are released). After each use, clean the spray channel to prevent clogging. To do this, turn the bottom of the bottle upwards and hold the spray button down until the spray channel is empty of aerosol. -
Solvent ZINGASOLV containing aromatic hydrocarbons, for diluting topcoats and primers, cleaning surfaces and tools. Zingasolv is manufactured to the highest standards. It does not contain detectable amounts of polycyclic aromatic compounds, heavy metals or chlorinated compounds. Zingasolv is a C9-C10 aromatic hydrocarbon solvent manufactured to the highest standards. It does not contain polycyclic aromatic, heavy metal or chlorine compounds above the permitted level. Composition: Gasoline (petroleum), light aromatic. EC 918-668-5. Application: Zingasolv is intended for dissolving ZINGA and other Zingametall products. To dilute ZINGA, add the prescribed amount (amounts are given as a percentage of weight) to the ZINGA container placed on the scale. Mix thoroughly before application. Repeated exposure may cause skin dryness and cracking. Flammable liquid and vapor. May be fatal if swallowed or enters airways. May cause respiratory irritation, drowsiness and dizziness. Toxic to aquatic organisms, with long-term effects. Keep away from open flame/heat/sparks/heated surfaces. Do not smoke. Use precautions to avoid static electricity. Avoid inhalation of gas/vapour. In case of ingestion, consult a doctor immediately. Do not induce vomiting. Handle the container and contents in accordance with nationally established requirements.
-
Electroplating liquid with cathodic protection for surface application by brush, roller or spray. With 1 kg of the product, it is possible to cover a surface of approx. 3,62 m² (taking into account the thickness of the dried coating layer of 60 µm). ZINGA is a one-component galvanizing system that ensures long-term cathodic protection of ferrous metals. The zinc content in the dried coating is a minimum of 96% with a zinc particle purity of 99,995% (according to ISO 3549). The product does not contain xylene, toluene, methyl ethyl ketone or methylene chloride. The dried layer is non-toxic and can be in contact with drinking water. Solids 58% by volume. The matte gray metal layer dries quickly (touch dry in 10 min at 20°C) and withstands heat up to 120°C. The protective powder layer does not crack when the metal expands and contracts and does not peel. ZINGA is easy to apply to ferrous metal, previously hot-dip galvanized and ZINGA coated surfaces. Used as an alternative to hot-dip galvanizing or metallization and to strengthen and repair previously hot-dip galvanized surfaces or as a base layer in the Duplex system (ZINGA + paint). Each applied layer of ZINGA merges with the previous one and forms a single, stronger protective layer. An excellent tool for corrosion protection of hard-to-reach or large surfaces. Store in a cool and dry place, the shelf life of the composition is unlimited. The product contains a maximum of 500g/L of volatile organic compounds (VOC) according to the permitted EU limit (cat. A/i). Due to the active composition, the unopened package has an unlimited shelf life. Preparation of the substrate: apply ZINGA to a clean, rough surface from which dirt, grease, paint, slag and salts have been removed. ZINGA needs to make direct contact with the metal for the electrochemical reaction. ZINGA products can be applied to rusted surfaces if all loose rust has been removed with a metal brush and the surface has been cleaned of rust dust and grease. For cleaning, use jet cleaning with water (140 bar, 80°C) or Zingasolv. Clean the surface to SA 2 ½ (according to ISO 8501-1) using sandblasting or blasting. ZINGA only adheres to a roughened substrate, for better adhesion the substrate must be roughened (Rz 50-70 µm – DIN4768). Such a high degree of cleanliness and roughness is not necessary when covering smaller, less specific and previously hot-dip galvanized surfaces. Make sure the substrate is dust free before coating. Application: ZINGA must be thoroughly mixed before use (it is recommended to use a mixer). ZINGA can be applied to the surface with a brush, roller or sprayer (normal or airless) by constantly mixing the product. For application, the product can be diluted with Zingasolv to achieve the required viscosity (up to 5% when applied by brush, roller or airless spray and up to 15% when sprayed with air). White spirit is not suitable for dilution, do not use White Spirit! For use as a stand-alone system, a dried protective layer of 120-180 µm thickness is applied to the surface of ZINGA in two layers. The second layer is applied to the surface 1 hour after the first one becomes dry to the touch. When used as a duplex system (ZINGA + paint), ZINGA is applied to the surface in one layer (maximum 60-80 µm thick dried protective layer). ZINGA can be covered with most fast-drying paints (oil, tar, epoxy, polyurethane, vinyl, iron oxide and other paints). It is recommended to let the substrate dry for up to 72 hours before repainting and to test the suitability of the paint on a small surface beforehand. In order to prevent the base layer from reacting during repainting, you should first apply a thin layer of paint, let it dry, and then apply a paint layer of the required thickness to the surface. It is recommended to cover the edges, bolts and welded joints separately in advance. ZINGA can be applied at temperatures from -10°C to 40°C with humidity up to 95%. More information on the technical data card. Highly flammable. May cause long-term damage to the aquatic environment. Keep out of reach of children and away from sources of ignition - no smoking. Avoid inhalation of aerosol. Use in well-ventilated rooms. Follow the instructions for use/safety requirements. Do not spray on open flame or glowing material. -
Cylinder thread D3/4 DIN477 no.9 Gas outlet for M16x1,5, 6 and 9 mm hose Max productivity Ar 25 l/min, CO2 25 l/min Max inlet pressure 200 bar Manometer diameter 50mm, units in bar -
CUT-E is a soluble cutting oil emulsion intended for metal cutting in the metal industry.
Suitable for processing all iron alloys, non-ferrous metals and cast iron alloys.
Does not contain nitrites, phenols, sulfur, PCBs.
Cutting oil has rust-repelling, corrosion-preventing properties.
Soluble in water and forms a white emulsion. Add to water by slowly pouring.
Recommended concentrations:
GRINDING (2-5%)
TURNING, MILLING, FINAL STAGE DRILLING (3-5%)
THREADING, INTERNAL THREADING (4-6%)
BAND SAW CUTTING, CLEANING (6-8%) -
Stainless steel cover. Dries extremely fast, very effective coating, high elasticity and resistance to different temperatures. Glossy finish. -
Stainless steel cover. Dries extremely fast, very effective coating, high elasticity and resistance to different temperatures. Matte finish -
Surface and corrosion protection and anti-corrosion properties with a stainless steel protective layer. Excellent for all types of metal surfaces (steel, iron, zinc, aluminum, etc.). It provides excellent adhesion and, after drying, forms an elastic, compact and durable coating on the surface, which can be reworked. Resistant to chemicals, weather, scratches, corrosion and UV rays. -
A cleaning agent that quickly removes oil, grease and dirt from any surface, including plastics and rubber surfaces.
Dries quickly and leaves no residue on the surface. The composition uses a combination of polar solvents.
The aerosol bottle contains 94% of the active ingredient, pressurized with CO2 - ensures a significantly longer usage time compared to other cleaning agents.
Areas of use: cleaning of chains, cables, dies and molds. Also cleaning pneumatic tools and their parts.
Cleaning of engines and pumps. Cleaning photocells and sensors. -
An aerosol grease consisting of a solid combination of PTFE and ceramic additives.
Ensures 100% necessary lubrication at temperatures from -45 to +210 degrees.
Excellent resistance to steam, water and pressure. Resistance to both cold, hot and salt water.
Chemical resistance, extreme pressure resistance, very good aging resistance.
Well suited for lubricating metal and plastic contact points.
Well suited for lubricating all kinds of guides, bearings, valves, valves and taps. -
The pinnacle of the latest tribological science with a revolutionary formulation for universal use
Significantly improves movement speed, accuracy, increases productivity and reduces the need for maintenance materials.
The aerosol bottle contains 98,6% of the active ingredient, which is ~40% more when compared to similar products (e.g. WD30) when using the same size bottle
and therefore can be used significantly longer.
Reduces wear by 30% and repels water by 100%.
Dielectric, with anti-oxidation effect.
Removes dirt, with good penetration ability, ensures corrosion resistance.
