Description

Drive roller with wedge groove 1,0-1,2mm

Product description

This drive roller is specially designed for the Spartus MIG200 machine. The drive roller has wedge grooves that ensure accurate and stable wire feeding. The wire diameter of the drive roller is 1,0-1,2mm, which makes it ideal for various welding jobs.

Product features

• Drive roller with wedge groove
• Suitable for Spartus MIG200 machine
• Wire diameter: 1,0-1,2mm
• Accurate and stable wire feeding
• Ideal for various welding jobs

Manual

1. Make sure the Spartus MIG200 machine is switched off and disconnected from the mains.

2. Remove the old drive roller, if present.

3. Place the new drive roller in the drive roller slot of the Spartus MIG200 machine with wedge grooves.

4. Make sure the drive roller is properly seated and securely fastened.

5. Plug the Spartus MIG200 machine back into the mains and switch it on.

6. Check that the wire moves smoothly and stably through the drive roller.

7. Now you are ready to start welding with the Spartus MIG200 machine using the drive roller wedge groove