Description

The device can weld carbon steel, stainless steel, various aluminum alloys, etc.

Welding current max. 200A, smooth stepless adjustment.

Welding modes: TIG welding with direct current DC, TIG welding with alternating current AC, electrode welding with direct current DC, electrode welding with alternating current AC

In electrode welding, it is suitable for welding all used electrodes.

The device has an easy-to-set-up control panel. Allows to weld steel, stainless steel (pulse mode is also available for especially thin materials)

Aluminum and its alloys can be welded in the TIG AC mode.


Key features:

Compact and light machine, weighs only 8,7 kg

Easy parameter setting with one control button.

Anti-stick protection, arc dynamics, simplified arc ignition, LIFT lifting and HF non-contact ignition for TIG welding.

Technical specifications

Power supply 1 phase 230 V +-10%

Welding current 5-200 A AC, 5-170 A DC

Load capacity with alternating current according to EN60974-1 40 oC 200 A 35%

Load capacity with direct current according to EN60974-1 40 oC 170 A 40%

The start/stop currents are adjustable

Pre-gas 0- 2 s

Current rise slope 0-10 s

Slope of current drop 0-10 s

After gas 0- 10 s

Pulse width 5- 95 %

Pulse frequency 0,5-200 Hz

AC waveforms: square

AC balance -5 – +5

2T/4T switching

Arc ignition Lift/ HF- non-contact

Ready for remote control

In electrode welding, it is possible to weld with both direct and alternating current

Hot start e. simplified arc ignition 0-100 %

Arc force e. arc voltage monitoring 0-100 %

No-load voltage 52 V

Power factor 0,6

Efficiency 85 %

Insulation class H

Protection class IP23

Weight 8,7 kg

Dimensions 450x135x230 mm


Completeness

Earth terminal with 3m cable

TIG torch Spartus Easy 26 4m

Gas hose

A set of TIG accessories with various sizes of collets, collet holders and caps