Inverter type wire welding device for both wire welding and electrode welding.

With three-phase power

With a color LCD screen

Welding current in continuous operation mode at 60% load capacity: max. 250 A for wire welding and 220 A for electrode welding

The device is equipped with synergic control for MIG/MAG welding, allowing to set parameters manually.

Available programs: Steel with CO2 gas, steel with mixed gas, welding with filler wire. When a program is selected, the LED next to the corresponding program flashes

A simple control panel allows you to adjust the following MIG/MAG parameters:

welding arc voltage, wire feed speed, 2T/4T mode, inductance, Arc Force (easier electrode melting in electrode welding), Hot Start (better electrode ignition) and VRD-reduced no-load voltage

Possibility to change the polarity - can also be used when welding with gasless filler wire.

The large LCD screen allows you to monitor the exact parameters for example.

Wire feed mechanism with four drive rollers.



Technical specifications


Wire roll 300mm to 15kg

Power supply 3f 400V +-10%

Welding current for MIG welding 50-250A

Welding current for electrode welding 10-220 A

Welding current for TIG welding 10-250 A

Max current consumption 12 A

Load capacity 60%- 250-A MIG and 60%- 220 A MMA

Arc voltage for MIG welding 16,5- 26,5 V

Wire feed speed 2- 18 m/min

Weldable wires 0,8-1,2 mm

Wire feed mechanism with four drive wheels

Power factor 0,85

Efficiency 85%

Protection class IP21S

Insulation class F

Dimensions 920x470x740 mm

Weight 39 kg



Included

Ground terminal with 3m cable

Welding torch Spartus Easy 240 3m

Gas hose with clamps

Drive rollers for 0,8-1,0 mm wire.

Electrode holder with 3m cable.