SPARTUS® EasyMIG 125 is a light, compact wire welding machine based on IGBT transistors, with a single-phase 230V supply.
Enables welding with gasless filler wire.
Maximum welding current 100 A.
Equipped with protection functions with intelligent overvoltage, overcurrent and overheat protections.
If any of these problems occur, an alarm light will illuminate on the control panel and the welding current output circuit of the device will be automatically shut down to protect and extend the life of the device.
SPARTUS® EasyMIG 125 is suitable for working outdoors and on construction sites thanks to its small dimensions and weight.
The wire feed mechanism is equipped with two drive rollers and a 1kg/100mm wire roll holder.
The MIG welding torch and ground cable are permanently connected to the machine.
Technical specifications:
Power supply ~1× 230V ± 10% 50 / 60 Hz
Welding current 40 – 100 A
Load capacity 30% 100 A
Arc voltage 16.6 V
Wire feed mechanism, with 2 drive rollers
Wire roll 1 kg / Ø100 mm
Wire diameter 0.8 mm
Current consumption up to 19.6 A
Power factor (cos?) 0.58
Insulation class F
Protection class IP21S
Weight 5.8 kg
Dimensions 410×285×150 mm
Complete set: • EasyMIG 125 • MIG torch SPE 150 3m • Earthing cable with terminal