A welding device with synergic control, which can perform the following welding methods:
MIG/MAG wire welding
MMA fusible electrode welding
TIG welding with direct current (both with and without pulse)
TIG welding with alternating current (both with and without pulse)
In TIG welding, arc ignition without contact (HF)
The device is equipped with two gas valves, so you can connect 2 different shielding gases. The device selects and controls which gas valve to control according to the selected welding program.
The welding parameters can be selected according to the thickness of the material to be welded and automatically adapt to the corresponding parameters.
Up to 10 programs can be stored.
Pre-recorded programs with carbon steel (SG3), stainless steel (Ss-309, Ss-316), aluminum (AL-5356, AL-4043), copper-silicon alloys (CuSi3) and filler wires (Fc-Rutile, Fc-Basic, Fc- 316) for welding.
Technical specifications:
Max welding current 200 A
Load capacity according to the standard 40 oC 180 A 60%, 160 A 100%
Welding current adjustment range 10-200 A
Arc voltage adjustment range for wire welding 14,5- 25 V
Wire spool D300 mm, 15 kg
Usable electrodes 1,6- 4,0 mm
Used electrodes for TIG welding 1,0-2,4 mm
Usable wire diameters 0,6-1,2 mm
Wire feed mechanism with 2 drive rollers
Power supply 1 phase 230 V
Required protection 25 A
Power consumption 9 kVA
Idle voltage 48 V
Dimensions 328x270x453 mm
Protection class IP23S
Standards EN60974-1, EN60974-10
Weight 29,8 kg
Completeness
Grounding cable 3 m
MIG torch SX25 4 m
Electrode holder with 3 m cable
TIG torch SR17 3 m
