Quickly becomes dry to the touch.
Instant rain and ice proof.
Suitable for bituminous materials, alkalis and metals.
Can be used on wet surfaces.
Melting temperature above +100°C.
Does not become brittle in the cold.
Can also be used in vertical joints.
Resistant to dilute acids, alkalis, exhaust gases and weathering.
With high tensile strength.
The surfaces must be free of grease, oil, dust and loose particles.
The surface to be covered must be dry.
Non-porous surfaces should be cleaned with solvent and a clean, lint-free cotton cloth.
Solvent residues must be removed with a clean cloth before evaporation.
Ensure adequate ventilation in all jointed areas.
During curing, avoid getting dirt on the surface and make sure that the surface of the joint is not affected by mechanical stress.
Product operating temperature +5°C to +30°C.
