Description
The device can weld carbon steel, stainless steel, various aluminum alloys, etc.
Welding current max. 200A, smooth adjustment without steps. Both remote control and pedal control are available as accessories.
When connecting a remote control or pedal, the device automatically recognizes the equipment being used and automatically switches to control from the remote control.
The device is suitable for all TIG welding applications with full parameter settings.
It is also suitable for welding all electrodes used in electrode welding.
Suitable applications for welding tanks, pipelines, boilers, industrial applications and maintenance work.
Key features:
Arc stability and arc control, for electrode welding, automatic sensitivity adjustment for material and
in the event of a change in electrode tip spacing.
Automatic synergistic control for alternating current parameters (balance-frequency-compensation),
simplified, optimal and easy setup.
Simple setting and saving of parameters with one button.
Double automatic cooling, the fan is activated only when necessary.
The tunnel-type cooling system ensures the protection of electronic components from particles coming with the air flow.
Air currents move inside the machine only to the components that need cooling.
STAND-BY function, the device switches to standby mode if not used for 10 minutes.
This ensures a longer life of the electronic components of the device and increases the efficiency of the device.
Minimal electricity consumption thanks to excellent energy efficiency. The electronics of the device are built in such a way that
that the energy from the supply network is used as efficiently as possible.
Anti-stick protection, arc dynamics, simplified arc ignition, LIFT lifting and HF non-contact ignition for TIG welding.
Built-in supply voltage stabilizer, the device can also be used with generator power and with large supply voltage fluctuations.
The device is equipped with VRD voltage reduction device function e. At idle, the voltage drops to a very low level, ensuring safety as well
when working in very extreme conditions (damp, wet).

Technical specifications
Power supply 1 phase 230 V
Protection 25 A
Power consumption 9,5 kVA
Allowed supply voltage 180-280 V
Welding current 10- 200 A
Load capacity for electrode welding according to EN60974-1 40 oC 160 A 60%, 130 A 100%
Load capacity during TIG welding according to EN60974-1 40 oC 170 A 60%, 140 A 100%
Pulse frequency up to 500 Hz
No-load voltage 65 V
Protection class IP23
Weight 14 kg
Dimensions 465x280x360 mm
Completeness
Earth terminal with 2m cable
TIG torch 4m
gas hose