Multipurpose inverter welding device for wire welding, electrode welding and TIG welding with direct current.
In the case of wire welding, it is also possible to perform welding with gasless filler wire and copper solder.
Designed for production welding in all environmental conditions. Load capacity 60% 250A according to EN 90791-1
The structure of the device is based on a modular system, additional devices can be added/changed/replaced by modules.
Equipped with a new welding crater monitoring system that controls the arc energy.
Synergic control, built-in programs for different materials, shielding gases and wire diameters.
55 factory programs, 10 memory locations for your own programs.
Materials to be welded: steel (SG3), stainless steel (Ss-309, Ss-316), aluminum (Al- 5356, Al- 4043), copper solder (CuSi3), Slag filler with wire (Fc- rutile, Fc- basic, Fc-316 ).
It is possible to set the parameters according to the thickness of the material to be welded (mm) or the wire feed speed (m/min). During welding, both arc voltage (V) and amperage (A) are displayed.
It is possible to monitor the wire consumption and consider the cost of welding.
Technical specifications:
Welding current 20A (15 V) – 320 A (30 V)
Load capacity 40 oC 40% 320 A, 60% 250 A, 100% 200 A
Usable welding wire steel 0,6-0,8-1,0-1,2 mm, stainless steel 0,8-1,0-1,2 mm, aluminum 1,0-1,2 mm
Power supply 400 V 3 phases (360- 440 V)
Power consumption max. 17 kVA
Required protection 16 A
No-load voltage 65 V
Wire feed mechanism with 4 drive rollers
Wire feed motor power 65 W
Wire feed speed max. 18 m/min
Wire spool D300- 15 kg
Cooling - automatic air cooling system, new double tunnel system
Protection class IP23
Dimensions 920x270x860 mm
Weight 54 kg
Standards EN90971-1, EN60974-10
Included
grounding cable 35mm2 3m
Aerofeed 5 wire feed mechanism
Intermediate cable 1,7m between machine and feed mechanism 50mm2
Welding torch SX-25, 4m