Inverter type wire welding device for both wire welding and electrode welding, as well as TIG welding (LIFT lifting ignition)

With single-phase power

Welding current max. 200 A for wire welding, 160 A for electrode welding and 160 A for TIG welding

The device is equipped with simple synergic control for MIG/MAG welding, allowing to set parameters manually.

A simple control panel allows you to adjust the following MIG/MAG parameters:

welding arc voltage, wire feed speed, 2T/4T mode, inductance,

Possibility to change the polarity - can also be used when welding with gasless filler wire.

Digital display screens allow for accurate parameter monitoring.

Wire feed mechanism with two drive rollers.



Technical specifications


Wire roll 200mm to 5kg

Power supply 1f 230V +-10%

Welding current for MIG welding 20-200A

Welding current for electrode welding 20-160 A

Welding current for TIG welding 20-160 A

Current consumption max MIG 26,4 A, MMA 23,2 A, TIG 14,4 A

Required mains load protection 25 A C-type

Load capacity 60%- 200 A MIG, 60%- 160 A MMA and TIG

Arc voltage for MIG welding 16- 24 V

Wire feed speed 3- 18 m/min

Weldable wires 0,6-1,0 mm

Wire feed mechanism with two drive wheels

Power factor 0,93

Efficiency 85%

Protection class IP21S

Insulation class F

Dimensions 400x195x270 mm

Weight 10 kg



Included

Ground terminal with 3m cable

Welding torch Spartus Easy 150 3m

Gas hose with clamps

Drive rollers for 0,8-1,0 mm wire.

Electrode holder with 3m cable.