Kit for patching flat tires.
The set includes everything you need to patch a tire - a threaded stud, a needle, glue, and grease strings necessary for patching. T-handles on the stud and needle for more comfortable use.

1. Locate the hole caused by the foreign object
2. Check that the tire has a maximum pressure of 1 bar.
3. Apply the adhesive in the package to the threaded stud.
4. Clean the hole in the tire with a threaded stud.
5. Insert the string into the tire pin until it reaches the center. The string should be smeared with glue first, if it has not been done before.
6. Use the needle to insert the string into the hole and leave a few centimeters of space.
7. Slowly remove the needle by turning it 90 degrees to the original position.
8. Then the protruding cord must be cut/removed so that about 1 mm of cord protrudes from the tire.
9. Add pressure to 2 bar, check for possible air leaks.

The glue in the package may cause drowsiness when used. Avoid inhalation. Keep out of the reach of children. In case of need for medical assistance, show the glue package. Use the glue only outdoors.
The glue may cause an allergic reaction. Repeated exposure may cause skin dryness or cracking.