The diamond cutter is intended for use with an angle grinder, M14 attachment. Ideal accessory for milling holes in various tiles, concrete and stone. Dry milling, does not require water cooling during milling. For large diameters, it is recommended to use a milling holder. Good dust removal prevents clogging of the milling cutter.
When using, do not apply too much pressure to the cutter. The weight of the angle grinder itself creates sufficient pressure. Always use the side handle of the angle grinder and two hands when working.
Diamond cutter XTline 83mm/M14
€40.26
Description
Diamond cutter XTline 83mm/M14
Product description
The diamond cutter is intended for use with an angle grinder, M14 attachment. It is the ideal accessory for milling holes in various tiles, concrete and stone. When milling, it is not necessary to use water for cooling, as it is designed for dry milling.
When using a diamond cutter with large diameters, it is recommended to use a cutter holder. Good dust extraction helps to prevent clogging of the milling cutter.
Manual
When using, do not apply too much pressure to the cutter. The weight of the angle grinder itself creates sufficient pressure. When working, always use the side handle of the angle grinder and hold with both hands.