Inverter type wire welding device for both wire welding and electrode welding, as well as TIG welding (LIFT lifting ignition)
Based on IGBT transistors. With single-phase power
Welding current max. 220 A for wire welding, 200 A for electrode welding and 220 A for TIG welding
The device is equipped with synergic control for MIG/MAG welding, allowing to set parameters manually.
Available programs: Steel with 0,6mm wire, 0,8mm wire, 1,0mm wire and Aluminum with 1,0mm wire.
When welding steel, you can choose shielding gas CO2 or mixed gas, there is also a separate program for welding with filler wire.
A simple control panel allows you to adjust the following MIG/MAG parameters:
welding arc voltage, wire feed speed, 2T/4T mode, inductance, Arc Force (easier electrode melting in electrode welding), Hot Start (better electrode ignition) and VRD-reduced no-load voltage
Possibility to change the polarity - can also be used when welding with gasless filler wire.
Various parameters can be set easily and quickly on the digital screen. When the programs are in place, the screen will graphically display the shape of the weld suggesting the thickness of the material at the given current.
Wire feed mechanism with two drive rollers.
Technical specifications
Wire roll 200mm 5kg or 300mm 15kg
Power supply 1f 230V +-10%
Welding current for MIG welding 50-220A
Welding current for electrode welding 10-200 A
Welding current for TIG welding 10-220 A
Current consumption max. MIG 37A, TIG 28A, MMA 39A
Required mains load protection 25 A C-type
Load capacity 60%- 220 A MIG, 60%- 220 A TIG and 60% 200A MMA
Arc voltage for MIG welding 16,5- 25 V
Wire feed speed 2- 12,5 m/min
Weldable wires 0,6-1,0 mm
Wire feed mechanism with two drive rollers
Power factor 0,76
Efficiency 85%
Protection class IP21S
Insulation class H
Dimensions 570x265x460 mm
Weight 19 kg
Included
Earth terminal with cable
Welding torch Spartus Easy 150 3m
Gas hose with clamps
Drive rollers for 0,8-1,0 mm wire.
Electrode holder with cable.
MIG torch consumables box
