Technical data: Glue sticks: 7-8mm; Voltage 230V, 50Hz; Power 10W, Max. Temperature 140 degrees
How to use: Place your foot in the holes on the sides of the glue gun. Before plugging in, place the glue gun on its stand, push the glue stick into the hole at the back of the gun. Connect the glue gun to the mains and let it warm up for about 5 minutes. If necessary, clean the surfaces to be glued before gluing. Then apply the glue in stripes or drops to the surfaces to be glued and immediately press them together. When you have finished gluing, unplug the glue gun and place it on the leg to cool. You can leave the glue stick in the glue gun, remove the glue residue from the nozzle of the glue gun after it cools down.
Safety requirements: Store the glue gun in a relatively dry and warm room, protect it from direct water. Always unplug the glue gun after use, keep it out of the reach of children. Caution, hot glue and glue gun tip can cause burns. Do not use the glue gun if it has visible damage or if the electrical cable is damaged. Do not use the glue gun near flammable materials or when gluing them.