Thread drill/drill M6x69mm 1/4″ HSS combi drill

Product description

This tap/drill is made of high quality HSS material and measures M6x69mm. The combi drill allows you to drill a hole and thread it in one pass.

1. Select a suitable drilling area and fix the workpiece firmly.

2. Place the drill bit on the surface to be drilled and start drilling.

3. While continuing to drill, hold the drill bit firmly and apply sufficient pressure.

4. Once the hole is drilled, turn off the drilling function and turn on the tapping function.

5. Place the threading bit in the drilled hole and start threading.

6. While continuing to thread, hold the threading bit firmly and apply sufficient pressure.

7. When the threading is finished, remove the threading tip and check the result.

– Before drilling, ensure that the workpiece is securely clamped and the drilling area is properly marked.

– Use the appropriate speed and pressure for the material you are drilling.

– Clean the cage