Quick coupler DX25
Suitable for welding equipment with a maximum welding current of 175 A
€36.60
Quick coupler DX25
Suitable for welding equipment with a maximum welding current of 175 A
This electrode holder is specially designed for welding equipment with a maximum welding current of 175 A. The electrode holder is equipped with a 16mm2 3 meter long cable, which provides sufficient length and diameter for welding work.
1. Connect the electrode holder to the welding machine, making sure that the connection is firm and secure.
2. Make sure the electrode holder cable is long enough to allow comfortable movement during welding.
3. Check that the DX25 quick-connect tip is properly connected to the electrode.
4. Adjust the welding current of the welding machine as needed, but do not exceed the maximum welding current of 175 A.
5. Begin welding work, always observing safety regulations and using the necessary personal protective equipment.
With this electrode holder, you will achieve an efficient and high-quality welding result, while being sure that you are using it with confidence
Weight | 0.96 kg |
---|---|
Dimensions | 400x300x100mm |