Description

Combining strength, long-lasting protection and unsurpassed restorative properties, significantly enhanced as a "protective" grease. Used to restore and protect friction pairs, but also in cases where you used other formulations that are not XADO greases. Safely and guaranteed to restore up to 50% of wear. The surfaces of friction pairs are exceptionally resistant to aggressive environments, abrasive wear, shock loads.

Advantages:

  • Protection and geometry restoration of friction surfaces;
  • Reducing the frictional resistance of the mechanism;
  • Prevention of jamming of the mechanism;
  • Reduction of noise and vibration;
  • Protects against water, dust and aggressive substances.

Usage:

  • Squeeze the contents of the tube into a syringe and bring it to the surface of the worn part, removing the old grease if possible;
  • Run-in for approx. 10 min. with the car raised, then drive 20 km in low-speed mode.
  • Approximate cost of 125ml package: joints and four wheel hubs.

Regenerating grease in aerosol. Usage:

  • Shake the balloon;
  • Spray the grease on the cleaned surface. Fill the bearing to 1/2 of the free volume.

XADO restoring grease meets the following requirements

  • NLGI3(ASTM D217)
  • ISO-L-XBCEB3(ISO 6743-9)
  • KP3K-20(DIN 51502)